Air jacket CO2 incubator – OBIO-RHP series

Air jacket CO2 incubator – OBIO-RHP series

Precision temperature control (37%) + Stable CO2 concentration control (5%) + Saturated humidity environment (≥95%) + Effective microbial contamination prevention

Technical Specifications

Basic Research · Cell Biology · Biotechnology · Clinical University Hospital · Organizational Engineering · IVF

Being CO2 incubator family

Chamber volume 40L\50L\60L\80L\150L\170L\190L\240L

Friendly and simply operation interface (touch screen)

• Main interface · On time display: Chamber temp. real value · Chamber temp. set value · CO2 real value · CO2 set value
• Curve display interface: Temp. display value · Temp. set value · CO2 display value · CO2 set value · Humidity display value (option) · Open and close door status curve · CO2 curve · Temp. curve · Humidity curve
• Sterilization set: Screen lock · Main screen · System setting · Sterilization setting · Curve display · Message · Abnormal alarm · Door status · USB · Alarm message · Fan status · Printer · UV light

It can display on time performance curve. You can check the temp., humidity and CO2 concentration three group curves changes at the same time. And abnormal alarm and door open or close message.

Accuracy temperature control system

Temp. in the chamber temp. uniformity≤±0.2℃ , all the samples are universal heating.

Note: Curve and uniformity are tested when the temp. in chamber are stable.

Temp. in the incubator temp. wave is ±0.1℃

OBIO-RHP/RWP series CO2 incubator

Intelligent air cycle system

• The power of cycle fan can be adjustable. When the temperature in the chamber is stable, the fan speed will be lowed down, it is adjusted to the speed that suitable for cell growth and avoid the samples vapor due to too much air.
• Temperature, CO2 concentration and temp. uniformity are improved by cycle fan.

Door control switch

• When the incubator is working and user open the inner glass door, CO2 incubator will pause heating ,CO2 gas inlet and cycle fan working automatically.

Shelves

• Easy-to-install and dismantle stainless steel shelf system that also prevents slippage.
• According to different chamber volume, the shelves heights can be easily adjusted or increased.
• Prevent slippage design When the experimenters place a large number of cell culture bottles or petri dishes and draw the shelves half out of the chamber, the shelves still can keep level to prevent the culture fluid overflow.

Integral internal chamber

• Stainless steel chamber 100% sunken corner, no dead angle and facilitate the experimenter's clean.
• Chamber and shelves are stainless steel by special electroplating treatment, it avoid corrosion and easy to clean and sterilization. No dead corner prevents microorganisms contamination.

Adjustable height of support legs

No water tray humidity providing design

• The machine outer high inside low structure can allow water go into chamber directly then no need for experimenter place water tray. It can ensure max square water evaporator and ensure chamber inside related humidity is more than 95%.The incubator inside humidity saturated fast, it avoid the sample dehydration.

Test hole(Option)

• It facilitate experiment operation and test temperature, achieving integrity of the experiment.
• When the incubators inside needs auxiliary equipments, the electric wires or control wires can go through the test hole to inside the chamber, then it doesn't need to guide the wires from the door and affect the whole chamber seal.

Multi-intelligent detection system

• Replace traditional button operation to touch screen interface.
• It can display on time performance curve. You can check the temp., humidity (option) and CO2 concentration three group curves changes at the same time. And abnormal alarm and door open or close message.
• With various alarms for example: Door unsealed, over or low temp. alarms, over or low CO2 concentration alarms, high temperature sterilization alarm, sensor broken etc.
• RS-485 can be installed for long distance remote control. (Options)

Door grooved handle

• Experimenter can easily open or close door because the grooved handle, it is easy to clean.

Magnetic door gasket

• Outer door uses magnetic door seal, inner glass door and chamber use silicone rubber seal, it ensures inside fully seal.

Heated outer door

• The outer door is heated to prevent condensed water from the glass door. It facilitates observe the experiment process, also it avoid the biological pollution possibility due to the condensed water from the inner glass door.

Inner glass door

• This door is convenient for experiment observe.The back of glass door has door switch.When the glass door open, the machine can cut down heating and air inlet valve and close the cycle fan.It prevents temp. CO2 concentration out of control.

HEPA filter (Only applied for RHP/RWP)

• A. HEPA efficient filters: The CO2 gas quality is a important factor to judge cell culture in the CO2 incubator. HEPA high efficient filters can filter bacteria and dust in the air. It eliminates cross contamination from outer air to incubator chamber air and keep the chamber inside aseptic. Close the door for 5 min, inside air can fast resume to hundred grade clean. HEPA air filter is easy to disassemble without any special instruments.
• B. Microbe HEPA filter: CO2 access port equips micro biological HEPA filter, it can filters diameter ≥0.3um Particles like CO2 gas bacteria and dust, the efficient reaches to 99.99%.
• C. CO2 inlet control system: We supply pressure release valve together with the equipment. It can control the pressure stable. The system has pressure protection function, it prevents over pressure or low pressure to the pipes that affect stable gas supply.

Technical parameter

Nature evaporate>95%